Home > News Center > Industry news

News Center

Related news

No search results found!

What standards should be paid attention to for the quality of cooling water for electronic radiators
2021-09-30 11:05:54

      What standards should be paid attention to for the quality of cooling water for electronic radiators

      The cooling water quality of the electronic radiator should meet the requirements. The resistivity of circulating water should not be lower than 2.5ki2, and the ph value should be between 6-9. The feed temperature does not exceed 35, and the water volume is 4-8L/min

      The cooling water quality of the electronic radiator should meet the regulations. The resistivity of circulating water should not be lower than 2.5ki2, and the ph value should be between 6-9. The feed temperature does not exceed 35, and the water volume is 4-8L/min. When used in high-pressure or high-pressure equipment, the above or higher water quality requirements must be guaranteed; when using an electronic radiator, special attention should be paid to prevent water leakage, blockage and condensation when the radiator is inserted. When using an electronic radiator, the radiator blades should be installed along the direction of the cooling airflow, the air intake temperature should not be higher than 400, and the air intake speed should be 4-6 milliseconds.

      The quality of raw materials (purity, thickness, machining accuracy, etc.) is inserted into the radiator. Production process (cracks and shrinkage holes caused by casting, etc.). Poor material and rough defects will directly affect the thermal conductivity of the heat sink; the surface roughness and flatness of the contact table directly affect the contact thermal resistance and pressure drop. After the butterfly spring is squeezed for 24 hours, the free height of the electronic radiator should remain stable, otherwise the spring may fail after being used for a period of time, resulting in poor contact with the mold.


69247bbbb5yqcp9b.jpg