The heat dissipation device of the electronic radiator depends on two aspects
The electronic radiator is a device that can accelerate the heat dissipation of the radiator. Its quality mainly depends on two aspects: heat dissipation and quietness. Integrated circuits are widely used in computer components. High temperature is the enemy of integrated circuits. Excessive temperature will not only cause unstable operation of the system, shorten the lifespan, and may even burn some parts. The cause of the high temperature is not from outside the computer, but from inside the computer or inside the integrated circuit. The function of the electronic radiator is to absorb the heat and then disperse it to the case or outside the case to ensure that the temperature of the computer components is normal. Most water heaters absorb heat by contacting the surface of heating components, and then transfer the heat to a distance in various ways, such as the air in the case, and then the case sends the hot air out of the case to complete the heat dissipation of the computer.
The metal fasteners (press plate, gland, disc spring) of the flat radiator and the conductive sheet of the water-cooled radiator should be protected by plating; the maximum allowable surface roughness of the radiator table is 3.2; the thermal conductive sheet of the radiator table should be Meet the requirements of GBB446.3; the surface of the radiator (including heat sink, fasteners and insulators) used for wet tropical semiconductor devices should be protected, and its resistance to humidity, salt spray and mold should meet the corresponding Standard for tropical semiconductor devices; special fasteners and insulators for flat-type radiators should meet the requirements of GBB446.3; radiator insulators and fasteners for power semiconductor devices. The tightening torque or fastening of the installation of radiators and power semiconductor devices The pressure should meet the relevant regulations of the device product standard.